基于XML的信息物理融合系统组件建模与仿真

信息物理融合系统（CPS）涉及多种计算模型的集成和协同工作，针对CPS设计方法不统一、重塑性差、复杂度高、难以协同建模验证等问题，提出一种结构化、可描述行为的异元组件模型。首先，用统一组件建模方法进行建模，解决模型不开放问题；然后，用可扩展标记语言（XML）规范描述各类组件，解决不同计算模型描述语言不一致和不可扩展问题；最后，用多级开放组件模型的协同仿真验证方式进行仿真验证，解决验证的不可协同问题。通过通用组件建模方法、XML组件规范描述语言以及验证工具平台XModel对医用恒温箱进行了建模、描述和仿真。医用恒温箱的案例表明，这种模型驱动建立可重塑异元组件并确认其设计正确性的过程，支持信息物理协同设计和边构建边纠正，可避免在系统实现过程中发现问题时再进行反复修改。     

Modified embedded-atom method interatomic potential for the Mg–Zn–Ca ternary system

Mg–Zn–Ca alloys are representative Mg alloys with high formability at room temperature. Their high formability is thought to be related to slip, twinning, and recrystallization of the alloys, but the detailed mechanisms have not yet been clarified. To enable atomistic simulations for investigating those behaviors, an interatomic potential for the Mg–Zn–Ca ternary system was developed. The development was based on the second nearest-neighbor modified embedded-atom method formalism, combining previously developed Mg–Zn and Mg–Ca potentials with the newly developed Zn–Ca binary potential. The Zn–Ca and Mg–Zn–Ca potentials reproduce structural, elastic, and thermodynamic properties of compounds and solution phases of relevant alloy systems in reasonable agreement with experimental data, first-principles and CALPHAD calculations. The applicability of the developed potentials is demonstrated through calculations of the effects of Zn and Ca solutes on the generalized stacking fault energy for various slip systems, segregation energy on twin boundaries, and volumetric misfit strain.     

OPM3要素对项目组合管理能力影响的SD建模与仿真

根据组织项目管理成熟度模型（OPM3），确定影响项目组合管理能力的OPM3要素，分析OPM3要素与项目组合管理能力的因果关系，构建系统动力学模型，仿真模拟OPM3要素对项目组合管理能力的影响。仿真结果表明：OPM3要素与项目组合管理能力正相关；OPM3要素对项目组合管理能力的影响在短期内并不显著；在OPM3要素中，对项目组合管理能力影响较为显著的是战略执行与规划、组织领导能力和信息分析。     

Physics‐based model of lithium‐ion batteries running on a circuit simulator

The authors developed a physics‐based equivalent circuit model of a lithium‐ion battery (LIB) whose parameters are continually updated, reflecting the theoretical calculation results of the Butler‐Volmer equation, diffusion equations of the lithium‐ion and lithium, and Nernst equations of the liquid and solid phases. The developed model was applied to the charge/discharge simulations of an LIB, and the experimental and simulated results of constant current discharges and pulsed‐charge/discharge were found to be in excellent agreement. In particular, using the developed model, analyzing transient responses of the LIB derived from the transition of the electric double layer charging to the electrode reaction is possible. These results demonstrate that the electrochemical performance of an LIB can be calculated on a circuit simulator using the developed model.     

Effect of Operating Parameters on Gas‐Solid Hydrodynamics and Heat Transfer in a Spouted Bed

Through a combined computational fluid dynamics and discrete element method approach, the effect of the operating parameters on the hydrodynamics and heat‐transfer properties of gas‐solid two‐phase flows in a spouted bed are extensively investigated. Considering the high velocity in the fountain region, gas turbulence is resolved by employing the large‐eddy simulation. The rolling friction model is adopted for more precise predictions of solid behavior near the wall. Subsequently, the gas‐solid flow patterns, gas‐solid velocities, and temperature evolution are investigated. Moreover, different operating conditions and geometry configurations are evaluated with respect to heat‐transfer performance. The results provide a fundamental understanding of heat‐transfer mechanisms in spouted beds.     

Microscopic details of asphaltenes aggregation onset during waterflooding

We report detailed microscopic studies of asphaltenes aggregation onset during waterflooding of petroleum reservoirs. To achieve this objective, a series of simulations are performed on asphaltenic-oil miscibilized with water at high pressure and temperature through molecular dynamics. Results of this simulation onset are applicable to asphaltenes behavior in real crude oils. Our simulation results illustrate that the aggregation onset in waterflooding generally follows three sequential steps: (i) Asphaltene-water interaction; (ii) Water bridging; (iii) Face-to-face stacking. Then, asphaltene-water and water-water hydrogen-bonding network surround every aggregate boosting the intensity of aggregation onset. We intend to utilize such understanding of these details in our predictive and preventive measures of arterial blockage in oil reservoirs during waterflooding.     

Contribution of metal vapor mass at periphery part of pulsed arc to electromagnetic force in weld pool

The arc welding has been used in various welding methods because it is inexpensive and high in strength after welding. However, it is a problem that accidents such as collapse of the bridge occur because of the welding defects. The welding of low cost and high productivity is required without the welding defects. The pulsed TIG welding is inexpensive and capable of high‐quality welding. The electromagnetic force contributing to penetration changes because the transient response of arc temperature and iron vapor generated from anode occurs. However, the analysis of pulsed TIG welding with metal vapor has been elucidated only metal vapor concentration near anode with transient phenomenon and heat flux. Thus, the theoretical elucidation of penetration depth with control factor has not been researched. In this paper, the contribution of metal vapor mass at the periphery part of pulsed arc to the electromagnetic force in the weld pool is elucidated. As a result, the iron vapor mass at periphery part decreased with increasing the frequency. The iron vapor was stagnated at axial center within one cycle. The electromagnetic force to the penetration depth direction in weld pool increased at axial center. Therefore, the metal vapor mass at periphery part plays an important role for the electromagnetic force increment at axial center.     

A practical data-flow verification scheme for business processes

Data in business processes becomes more and more important. Current standard languages for process modeling like BPMN 2.0 which include the data flow reflect this. Ensuring the correctness of the data flow in processes is challenging. Model checking, i.e., verifying properties of process models, is a well-known technique to this end. An important part of model checking is the construction of the state space of the model. However, state-space explosion typically is in the way of an effective verification. We study how to overcome this problem in our context by means of reduction. More specifically, we propose a reduction on the level of the process model. To our knowledge, this is new for the data-flow analysis of processes. The core of our approach are so-called regions of the process model that are relevant for the verification of properties describing the data flow. Non-relevant regions are candidates for reduction of the process model, yielding a smaller state space. Our evaluation shows that our approach works well on industrial process models.     

Self‐similarity analysis of vehicle driver's electrodermal activity

This paper characterizes stress levels via a self‐similarity analysis of the electrodermal activity (EDA) collected in a real‐world driving context. To characterize the EDA richness over scales, the fractional Brownian motion (FBM) process and its corresponding exponent H, estimated via a wavelet‐based approach, are used. Specifically, an automatic scale range selection is proposed in order to detect the linearity in a log scale diagram. The procedure is applied to the EDA signals, from the open database drivedb, originally captured on the foot and the hand of the drivers during a real‐world driving experiment, designed to evoke different levels of arousal and stress. The estimated Hurst exponent H offers a distinction in stress levels when driving in highway versus city, with a reference to restful state of minimal stress level. Specifically, the estimated H values tend to decrease when the driving environmental complexity increases. In addition, the estimated H values on the foot EDA signals allow a better characterization of the driving task than that of hand EDA. The self‐similarity analysis was applied to various physiological signals in literature but not to the EDA so far, a signal which was found to correlate most with human affect. The proposed analysis could be useful in real‐time monitoring of stress levels in urban driving spaces, among other applications.